accueil » treuils-de-tirage » TR3000C EVO trailer-mounted winch with compressor

TR3000C EVO trailer-mounted winch with compressor

Trailer mounted winch with compressor and double trailer with axle, Dedicated to pulling electric network cables and ducts in trenches and Telecom.

  • Power and engine: 16 HP petrol twin-cylinder engine with electric start, variable flow pump and hydraulic engines
  • 55-litre tank with return filter
  • Double hydraulic capstan
  • Forward/backwards valve controls
  • Cut-off and release according to selected option
  • Speed adjustment thanks to the flow adjustment lever on the pump
  • Hydraulic motor-driven cable storage drum
  • 630 m metal cable of 7.5 mm in diameter (breaking load 4.3 T) & locked swivel
  • Automatic cable storage
  • Design/Chassis: road towing with a GVW of < 750 kg (standard driving licence)
  • Painted metal structure chassis
  • Double-jointed drawbar with inertia-braked axle
  • Winch cover made of ribbed aluminium sheet metal with separate compartments between the winch and the engine
  • Storage unit inside the winch
  • Road signs, bumper and markings in compliance with the Highway Code and UTAC rules with camber certificate
  • Stabilisers: two screw stabiliser legs
  • Conformity with the Machinery Directive: EC
  • Maintenace service

  • Max. pulling force (daN) (meters/minute) : from 0 to 3000 daN
  • Pulling speed (meters/minute) :
  • Routing speed (metres/minute) : Continuous adjustment from 0 to 60 m/min depending on the force

  • Hydraulic tool socket (20 litres/140 bar)
  • Locked swivel
  • FLV4 electronic data logger
    • Stops the winch automatically if the programmed effort is exceeded
    • Chassis with triangulation device for length and pulling force information pick-ups (force sensor and magnetic detector)
    • Permanent touch-screen display of pulling parameters
    • Winch data history stored on USB drive showing effort, length and speed
    • Remote software update
    • Device made according to France Telecom recommendations
  • HEP.i DC 2.5 cut-off dynamometer:
  • Stops the winch automatically if the set pressure threshold is exceeded
  • Submersible water pump, empty draft chambers; flow rate 52 or 57 m3/h, with hydraulic supply hoses (5, 7 or 10 m long according to requirements): operates on the hydraulic tool socket
  • Hydraulic cable cutter
  • Jackhammer/concrete-breaker
  • Hydraulic disc machine for cutting concrete or asphalt mixes


HEP Industrie utilise des cookies pour réaliser des statistiques de visites anonymes. En savoir plus 
    Ok        Refuser