Post remover
POST REMOVER

Post remover for telecom maintenance:
- Clamps onto the base of the pole via a reinforced chain which can withstand up to 12 tonnes.
- It comes in three separate parts for easy transportation and to facilitate positioning at the base of the pole. Weight of the heaviest part: 25 kg.
- Ideal for working in confined spaces in urban areas as well as in the countryside
- Connects directly to the hydraulic tool socket (140 bar – 20 l/min.), particularly that of the Telecom 20 digger derrick
- Possible to work at an incline thanks to the joint between the cylinder and the base
- The winch on the digger derrick clamps onto the post in order to secure the hoisting operation, particularly during the final stages.
- Supplied with a set of hoses (10m), push-pull cylinder and hydraulic controls.
- A mechanical welded support for maintaining the position around the post
- The winch on the digger derrick clamps onto the post in order to secure the hoisting operation, particularly during the final stages.
Benefits
- Safety
- Easy to use and manipulate
- Increased operator productivity
- Easy to set up / and manipulate
- Management of machine operating costs: it is forbidden to remove posts using a digger derrick if the pulling force required exceeds the machine specifications
For example, in some cases, the pulling force required for the winch may exceed 7 tonnes (hard / cloggy ground…).
Technical characteristics
| ELEMENTS | MEASUREMENT |
| Pushing force: | 12 tonnes at 140 bars |
| Travel: | 400 mm |
| Max. pole diameter: | 300 mm |
| Weight of cylinder, chain, base, slider | 25 kg / 6 kg / 10 kg / 13 kg |

Discover other applications and features of the pole puller:
- Possibility of working on slopes, thanks to a joint between the jack and the baseplate
- The pole is held by the winch of the crane-drill, to secure the operation, particularly at the end of the lift.
- The hydraulic pole puller is supplied with a set of 10m hoses, push-pull and hydraulic control.
- A welded bracket is also provided to hold it in position around the pole.