accueil » treuils-de-tirage » TR 1000 truck-mounted winch

TR 1000 truck-mounted winch

It is specially designed for pulling and routing optic fibres overs long distances. The TR 1000 is a truck-mounted cable pulling winch. It can withstand a pulling force of up to 1,000 daN (or 1 tonne).

The TR1000 truck-mounted winch is a hydraulic variable speed double capstan winch.

  • Power and engine: variable flow hydraulic pump mounted on truck-mounted PTO, hydraulic motors
  • Tank and 50 litre tank hydraulic system and filtration
  • Operation of the truck-mounted winch: double hydraulic capstan
  • Forward/reverse valve controls
  • Force adjustment, pressure adjustment, cut-off and release according to selected option
  • Speed flow adjustment
  • Hydraulic motor-driven cable storage drum with clutch and brak
  • Cable: 1,500 m of nylon cable diameter 6 mm (max. breaking load 600 kg)
  • Semi-automatic cable storage
  • Swivel outlet pulley with ferrule stop
  • Painted metal structure chassis mounted on carrier GVW 3.5 t EURO VI with bare chassis min. payload 1,600 kg,
  • Standard camber: manual lift triflash
  • Winch cover of ribbed aluminium sheet metal
  • Panel storage unit,
  • 2 side storage units, cone storage
  • Road signs, bumper and markings in compliance with the Highway Code and UTAC rules

Additional equipment

  • Screw compressor 3000 l/min at 7 bar or 5000 l/min supplied, Chicago Pneumatic brand with 10 ml compressed air hose
  • Weight < < 3 500 kg

Conformity with the Machinery Directive: EC

With safety device to prevent winch operation if the cover is not in the working position.

You also have access to all the services associated with the carrier-mounted winch, in particular our maintenance and repair service.

  • Max. pulling force (daN) (meters/minute) : 0 to 1000 daN (2 positions 500 or 1000 daN)
  • Pulling speed (meters/minute) :
  • Routing speed (metres/minute) : Continuous adjustment from 0 to 80 m/min depending on the force

  • Hydraulic tool socket 20 litres/140 bar
  • Locked swivel
  • FLV4 electronic data logger
    • Stops the winch automatically if the programmed effort is exceeded
    • Chassis with triangulation device for length and pulling force information pick-ups (force sensor and magnetic detector)
    • Permanent touch-screen display of print parameters
    • Print history stored on USB drive showing effort, length and speed
  • Remote software update
  • Device made according to France Telecom recommendations
  • HEP.i DC 2.5 cut-off dynamometer :
  • Stops the winch automatically if the set pressure threshold is exceeded
  • Submersible water pump, empty draft chambers; flow rate 52 or 57 m3/h, with hydraulic supply hoses (5, 7 or 10 m long according to demand): operates on the hydraulic tool outlet
  • Hydraulic cable cutter
  • Jackhammer/concrete breaker
  • Hydraulic disc machine for cutting concrete or asphalt mixes

Mounting is on a carrier provided by you. TECHNICAL CHARACTERISTICS

  • EURO VI (not EURO6) truck-mounted platform GVW from 3.5 tons, 2 person chassis cab,
  • Minimum payload available Bare chassis 1600KG MIN.
  • Wheelbase to be validated by our design office according to the chosen truck-mounted platform
  • A 15 m/kg and 1/1 ratio PTO
  • A variable speed governor
  • A bodywork socket for accelerating, decelerating, stopping and starting the engine from the control station
  • A towing hook with 12 V trailer power socket
  • An underride guard

HEP Industrie utilise des cookies pour réaliser des statistiques de visites anonymes. En savoir plus 
    Ok        Refuser