Télécom 20 pole erection unit
The Telecom 20 pole erection unit for the telecom industry ensure the efficient installation of utility poles with a minimum drilling depth of 3.8 m and a maximum depth of 5.7 m. They are also suitable for all types or ground (hard, rocky, calcareous rock).
Description of the Télécom 20 pole erection unit
-
- Fixed main boom
- Collapsible arm : one part
- Hydraulic power supply to the head of the boom : hose belt
- Double-acting lifting jack with non-return valve: 1 cylinder
- Control unit : on the flatbed
- Rotation turret by means of a 700° planetary rotation reducer with mechanical locking system (continuous rotation option)
- Two rear A-frame stabilisers
- Lift winch with planetary reduction, mechanical brake with hydraulic pressure failure
- Electrical capacity limiter
- Moment limiter with pressure tapping on the main arm cylinder
- Safety limit high hook with counterweight
- Cable lifting height: Diam. 12 mm, length 25 m
- Lifting angle capacity, depending on machine orientation angle 120° backwards
- 140 litre hydraulic tank with air cooler
- A drilling engine with storage along the arm
- Socket for hydraulic tools (140 bar – 20 l/min)
- EU compliant
STANDARD BODYBUILD
-
- Manufacture and flatbed installation
- Non-slip marine treated melamine floor
- Machine support
- Fixed panels on the right and left sides of the flatbed
- Auger/core drill storage space on flatbed
- Pole holders with integrated extensions
- Pole holders on cab
- Fire extinguisher
- Traffic cone storage
- Storage panels on the back of the cabin
- Pebble crate
- Storage boxes on or under the flatbed: according to the bodywork plan drawn up further to the quotation
- Ladder or access stairs
- Road signals and road markings in compliance with the Highway Code
- Painted in the company’s colours
- Delivery and lift commissioning by regulatory control body
Telecom pole erection unit Télécom 20 options
Tools
- Core barrels from 300 mm diameter up to 400 mm diameter max
- Augers with diameters from 250 mm to 400 mm, equipped for hard or soft ground,
- Hydraulic tools: hydraulic pole puller, grinder, water pump, concrete breaker, vibrating needle, tamper, hydraulic pruning pole, etc…
Machine Options :
- Remote control
- 4T snatch block
- Kit Emergency hand pump
- Emergency electro-pump
Bodybuild Options :
- Composite chocks for stabilizer pads
- Removable panels
- PVC tubes for fabric panel storage
- Storage boxes in the desired size
- Reinforced protection cap on top of the cab
- Hydraulic reel (tool socket)
- Oxy-acetylene torch reel
- Compressed air reel
- Oxy-acetylene bottle holder
- Additional pebble crate or sand/gravel bucket
- Water tank
- Electric or manually raised ‘tri-flash’ hazard warning triangle
- Flashing lights (Flashing lights and/or penetrating fog lights)
- Additional work lights
- 3.5T hook or more depending on the pre-equipment of the carrier
- Bespoke bodybuild available on request
-
- Minimum GVWR (Tons): 12 T
- Minimum wheelbase between axles 1 and 2*: 3.5 m
- A bodywork socket for accelerating, decelerating, stopping and starting the engine from the machine’s control unit..
- Rear impact guard
- Reinforced suspension
- Differential lock
- Echappement in the recommended direction
- Reverse beeper
- Hollow-shaft power take-off (450 Nm /R.1)
And the Telecom pole erection unit has available all HEP Industrie services. More about our services
- Max. Height Under Hook (m) : 8.1
- Lifting winch force on one strand (daN) : 2000
- Lifting winch force on one strand (daN) : 4000
- Core drills (mm) : 400