TR 1000 truck-mounted winch
It is specially designed for pulling and routing optic fibres overs long distances. The TR 1000 is a truck-mounted cable pulling winch. It can withstand a pulling force of up to 1,000 daN (or 1 tonne).
The TR1000 truck-mounted winch is a hydraulic variable speed double capstan winch.
- Power and engine: variable flow hydraulic pump mounted on truck-mounted PTO, hydraulic motors
- Tank and 50 litre tank hydraulic system and filtration
- Operation of the truck-mounted winch: double hydraulic capstan
- Forward/reverse valve controls
- Force adjustment, pressure adjustment, cut-off and release according to selected option
- Speed flow adjustment
- Hydraulic motor-driven cable storage drum with clutch and brak
- Cable: 1,500 m of nylon cable diameter 6 mm (max. breaking load 600 kg)
- Semi-automatic cable storage
- Swivel outlet pulley with ferrule stop
- Painted metal structure chassis mounted on carrier GVW 3.5 t EURO VI with bare chassis min. payload 1,600 kg,
- Standard camber: manual lift triflash
- Winch cover of ribbed aluminium sheet metal
- Panel storage unit,
- 2 side storage units, cone storage
- Road signs, bumper and markings in compliance with the Highway Code and UTAC rules
Additional equipment
- Screw compressor 3000 l/min at 7 bar or 5000 l/min supplied, Chicago Pneumatic brand with 10 ml compressed air hose
- Weight < < 3 500 kg
Conformity with the Machinery Directive: EC
With safety device to prevent winch operation if the cover is not in the working position.
You also have access to all the services associated with the carrier-mounted winch, in particular our maintenance and repair service.
- Max. pulling force (daN) (meters/minute) : 0 to 1000 daN (2 positions 500 or 1000 daN)
- Pulling speed (meters/minute) :
- Routing speed (metres/minute) : Continuous adjustment from 0 to 80 m/min depending on the force
- Hydraulic tool socket 20 litres/140 bar
- Locked swivel
- FLV4 electronic data logger
- Stops the winch automatically if the programmed effort is exceeded
- Chassis with triangulation device for length and pulling force information pick-ups (force sensor and magnetic detector)
- Permanent touch-screen display of print parameters
- Print history stored on USB drive showing effort, length and speed
- Remote software update
- Device made according to France Telecom recommendations
- HEP.i DC 2.5 cut-off dynamometer :
- Stops the winch automatically if the set pressure threshold is exceeded
- Submersible water pump, empty draft chambers; flow rate 52 or 57 m3/h, with hydraulic supply hoses (5, 7 or 10 m long according to demand): operates on the hydraulic tool outlet
- Hydraulic cable cutter
- Jackhammer/concrete breaker
- Hydraulic disc machine for cutting concrete or asphalt mixes
Mounting is on a carrier provided by you. TECHNICAL CHARACTERISTICS
- EURO VI (not EURO6) truck-mounted platform GVW from 3.5 tons, 2 person chassis cab,
- Minimum payload available Bare chassis 1600KG MIN.
- Wheelbase to be validated by our design office according to the chosen truck-mounted platform
- A 15 m/kg and 1/1 ratio PTO
- A variable speed governor
- A bodywork socket for accelerating, decelerating, stopping and starting the engine from the control station
- A towing hook with 12 V trailer power socket
- An underride guard